Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved
page
14 of 49
This is the main power supply of the Development Board and it is the suggested method
to be used with this device.
You could use the provided 12V power supply plugging its connector to SO101.
As described above to use this Power supply input the PL201 Jumper has to be set
between pin 2 and 3.
The following picture is showing the mechanical dimensions of SO101 connector.
The following picture is showing the polarity of the Power supply connector
i n n
e
r c o
n
t a
c t
o
u
t e
r c o
n
t a
c t
p
o
w
e
r j c k
. s k d
Summary of Contents for xE910
Page 1: ......
