background image

 
 

 
 

xE70-915 RF Module User Guide

 

1VV0301106 

rev.3 – 2015-03-04 

 

Reproduction forbidden without written authorization from Telit Communications S.p.A. - All Rights 
Reserved. 

 

Page 3 of 34 

 

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE 

Notice 
While  reasonable  efforts  have  been  made  to  assure  the  accuracy  of  this  document,  Telit 
assumes  no  liability resulting  from  any  inaccuracies or  omissions  in this  document,  or  from 
use of the information obtained herein. The information in this document has been carefully 
checked  and  is  believed  to  be  entirely  reliable.  However,  no  responsibility  is  assumed  for 
inaccuracies or omissions. Telit reserves the right to make changes to any products described 
herein and reserves the right to revise this document and to make changes from time to time 
in content hereof with no obligation to notify any person of revisions or changes. Telit does 
not  assume  any  liability  arising  out  of  the  application  or  use  of  any  product,  software,  or 
circuit described herein; neither does it convey license under its patent rights or the rights of 
others. 
It  is  possible  that  this  publication  may  contain  references  to,  or  information  about  Telit 
products (machines and programs), programming, or services that are not announced in your 
country. Such references or information must not be construed to mean that Telit intends to 
announce such Telit products, programming, or services in your country. 

Copyrights 
This  instruction  manual  and  the Telit  products  described  in  this  instruction  manual  may  be, 
include  or  describe  copyrighted  Telit  material,  such  as  computer  programs  stored  in 
semiconductor  memories  or  other  media.  Laws  in  the  Italy  and  other  countries  preserve  for 
Telit  and  its  licensors  certain  exclusive  rights  for  copyrighted  material,  including  the 
exclusive right to copy,  reproduce in  any  form,  distribute  and  make  derivative works  of the 
copyrighted  material.  Accordingly,  any  copyrighted  material  of  Telit  and  its  licensors 
contained  herein  or  in  the  Telit  products  described  in  this  instruction  manual  may  not  be 
copied,  reproduced,  distributed,  merged  or  modified  in  any  manner  without  the  express 
written permission of Telit. Furthermore, the purchase of Telit products shall not be deemed 
to  grant  either  directly  or  by  implication,  estoppel,  or  otherwise,  any  license  under  the 
copyrights, patents or patent applications of Telit, as arises by operation of law in the sale of a 
product. 

Computer Software Copyrights 
The Telit and 3rd Party supplied Software (SW) products described in this instruction manual 
may  include  copyrighted  Telit  and  other  3rd  Party  supplied  computer  programs  stored  in 
semiconductor  memories  or  other  media.  Laws  in  the  Italy  and  other  countries  preserve  for 
Telit  and  other  3rd  Party  supplied  SW  certain  exclusive  rights  for  copyrighted  computer 
programs,  including  the  exclusive  right  to  copy  or  reproduce  in  any  form  the  copyrighted 
computer  program.  Accordingly,  any  copyrighted  Telit  or  other  3rd  Party  supplied  SW 
computer programs contained in the Telit products described in this instruction manual may 
not be copied (reverse engineered) or reproduced in any manner without the express written 
permission of Telit or the 3rd Party SW supplier. Furthermore, the purchase of Telit products 
shall  not  be  deemed  to  grant  either  directly  or  by  implication,  estoppel,  or  otherwise,  any 
license under the copyrights, patents or patent applications of Telit or other 3rd Party supplied 
SW, except for the normal non-exclusive, royalty free license to use that arises by operation 
of law in the sale of a product.  
 
 

Summary of Contents for xE70-915






































Reviews: