ME310G1 Hardware Design Guide
1VV0301588 Rev. 12
Page 55 of 96
2021-06-14
•
if EM noisy devices (such as fast switching ICs, LCD and so on) are present on the
PCB hosting the ME310G1, take care of the shielding of the antenna line by burying
it in an inner layer of PCB and surrounding it with the Ground planes, or shield it
with a metal frame cover;
•
if the noisy EM devices are not present around the line, the use of geometries such
as Microstrip or Grounded Coplanar Waveguide is preferable, since they typically
ensure less attenuation than a Stripline of the same length.
