xN930 M.2 Hardware User Guide
8.3
Power Consumption
This section lists the power consumption targets.
Typical target values at Vsys = 3.3 V
Table 27
LTE Power Consumption
M.2 Power Consumption (*)
Transmit Power
LTE Use Case
Band
10 dBm
23 dBm
LTE UTP, Cat. 3, 100 Mbps/50 Mbps, 20
Band 7
1068 mW
2531 mW
LTE UTP, Cat. 3, max throughput, 10 MHz Band 17
916 mW
2394 mW
LTE Use Case
Standby Power
LTE Stand-by current, DRX 1.28 s serv.
Cell only
6 mW
(*) Applicable to modules:
•
LN930
•
LN930-AP
Table 28
UMTS Power Consumption
M.2 Power Consumption
Transmit Power
UMTS Use Case
(DC-HSDAP+ or HSDPA+)
Band
10 dBm
UMTS FTP, Cat. 24, RxDiv
(M.2 DC-HSDPA+)
Band 1
988 mW
UMTS FTP, Cat 14, QAM64
(M.2 DC-HSDPA+)
Band 1
771 mW
UMTS FTP, Cat 14, QAM64
(M.2 HSDPA+)
Band 1
813 mW
Standby Power
UMTS Stand-by current, DRX7, 16NB cells
-
6 mW
Table 29 GSM Power Consumption
GSM Use Case
Band
Transmit Power
Reproduction forbidden without written authorization from Telit Communications S.p.A. - All Rights Reserved.
Page 58 of 77
