Telit Wireless Solutions GM862GPS Series Technical Manual Download Page 20

Page: 20 / 57

TECHNICAL MANUAL

Telit GM862-GPS

Quad Band GPS Data Terminal Module

Pag.20 of 79

Rev. 0

The STAT_LED is an Open Collector output where it is possible to directly connect a LED
to show information on the network service availability and Call status.

STAT_LED indications

LED status

Device Status

permanently off

device off

fast blinking
(period 1s, Ton 0,5s)

Net search / Not registered /
turning off

slow blinking
(period 3s, Ton 0,3s)

Registered full service

permanently on

a call is active

3.7.13 Automatic answer (Voice, Data or FAX)

After n (depends of settings) rings automatically answers with beep (see S0 parameter).

3.7.14 Supplementary services (SS)

•

Call Barring,

•

Call Forwarding,

•

Calling Line Identification Presentation (CLIP),

•

Calling Line Identification Restriction (CLIR),

•

Call Waiting, other party call Waiting Indication,

•

Call Hold, other party Hold / Retrieved Indication,

•

Closed User Group supplementary service (CUG),

•

Advice of Charge,

•

Unstructured SS Mobile Originated (MO)

3.7.15 Acoustic signalling

The acoustic signaling on the selected acoustic device are the following:

•

Call waiting;

•

Ringing tone;

•

SMS received tone;

•

Busy tone;

•

Power on/off tone;

•

Off Hook dial tone;

•

Congestion tone;

•

Connected tone;

•

Call dropped;

•

No service tone;

•

Alarm Tone.

Summary of Contents for GM862GPS Series


























































Search results

Summary of Contents for GM862GPS Series

Reviews:

Related manuals for GM862GPS Series

Brands by name

Popular brands

Telit Wireless Solutions GM862GPS Series, Technical Manual

Search results

Summary of Contents for GM862GPS Series

Reviews:

Related manuals for GM862GPS Series

Brands by name

Popular brands