manualshive.com logo in svg

Telit Wireless Solutions GM862GPS Series, Technical Manual

Share
Download
Telit Wireless Solutions GM862GPS Series Technical Manual Download Page 5

TECHNICAL MANUAL 

Telit GM862-GPS 

Quad Band GPS Data Terminal Module 

 

Pag.5 of 79 

Rev. 0 

The design and development of the Telit GM862-GPS module is in line with the following 
documents: 
3GPP TS 51.010–1 GSM/EDGE Radio Access Network; Digital cellular 
telecommunications system (Phase 2+): Mobile Station (MS) Conformance Specification; 
Part 1. Conformance Specification. 
EN 301 511 Global system for mobile communications (GSM); Harmonised standard 
for mobile stations in the GSM 900 and DCS 1800 bands covering essential requirements 
under Article 3(2) of the R&TTE directive (1999/5/EC). 
EN 60950 Safety of information technology equipment, including business equipment. 
EN 301 489–07 Electromagnetic compatibility and radio spectrum matters (ERM); 
Electromagnetic compatibility (EMC) standard for radio equipment and services;           
Part 7: Specific conditions for mobile and portable radio and ancillary equipment of digital 
cellular radio telecommunications systems (GSM and DCS). 

 

Summary of Contents for GM862GPS Series


























































Reviews:

No comments

Brands by name

Popular brands

Load more brands