S42 Hardware User Guide
Reproduction forbidden without written authorization from Telit Communications S.p.A. - All Rights Reserved.
Page 53 of 62
8
Compliances
The S42/AI has been tested to comply to the appropriate EU, FCC, IC and KCC
directives.
CE testing is intended for end products only. Therefore CE testing is not mandatory for a
Bluetooth Module sold to OEM’s. However Telit E+V GmbH provides CE tested Modules
for customers in order to ease CE compliance assessment of end products and to minimize
test effort.
8.1
Declaration of Conformity CE
The S42/AI fully complies with the essential requirements of the following EU
directives:
•
R&TTE 1999/5/EC
•
RoHS 2011/65/EC
The actual version of EU Declaration of Conformity (EU DoC) can be downloaded from the
Telit download zone.
The CE compliance declaration is in progress.
The above link may expire, because a new version of the EU DoC is available. Please look up
the EU DoC from the Telit web site directly then.
8.2
FCC Compliance
The S42/AI has been tested to fulfill the FCC requirements. Test reports are
available on request. Grants of the Full Modular Approval is shown below.
The FCC Certification is in progress: FCC ID will be RFRMS42
8.2.1
FCC Grant
8.2.2
FCC Statement
This device complies with 47 CFR Part 2 and Part 15 of the FCC Rules and with.
Operation is subject to the following two conditions:
this device my not cause harmful interference, and
