Telic STD35 User Manual Download Page 9

accepting the call) 

STD35  does Not react to 

Configuration SMS 

Wrong IMEI Number in the SMS / 

SMS not yet delivered 

IMEI  Number to be checked. / SMS 

delivery can take some time 

STD35 doesn’t react on SMS 

or Calls, even though being 

booked to GSM Network 

The Mobile phone doesn’t send 

the phone number („Incognito 

Mode“) 

Please configure Mobile phone in 

the way, that the phone number is 

also transmitted. 

Both red LEDs blink 

consecutively 

The configuration call hasn’t been 

done yet. 

Please do configuration call 

Technical Data 

  GSM: Dual Band EGSM 900/1800 MHz, compatible with ETSI GSM Phase 2+ Standard 

  Output power:  

Class 4 (2W @ 900 MHz) 

Class 1 (1W @ 1800 MHz) 

  Temperature range: -20°C - +75°C 

  Weight: approx. 160g 

  Dimensions:  130x85x30 mm (LxBxH) 

  Supply voltage: 5-32V DC 

  Idle current: 32 mA, peak current up to 500 mA 

  Max. Switching current: 5 A 

Max. Switching voltage: 30V AC 

  Input voltage (digital inputs) 

logic 1:  

 

 

5 - 20V 

logic 0:  

 

 

< 1,5V  

 

 

I case of technical problems and questions concerning the STD35 our Hotline is available for you: 

 

Mo. – Fr.: 9:00 a.m. – 5:00 p.m. 

Techn. Hotline: 

+49 (0)89 / 4902 686 11 

 

For other questions about the STD35 please dial:Sales 

+49 (0)89 / 4902 686 29 

 

Issue:  April  2005, Subject to change without notice ! 

Telic GmbH, Raiffeisenallee 12b D-82041 Oberhaching – 

www.telic.de

 – 

info@telic.de

  

Summary of Contents for STD35










Reviews: