23/33
ü
ü
To check the number of outgoing calls that have been made, while
the telephone is not in use, press “FNC”,”*”,”2”,”1”, and enter the
registered digit Outgoing Call Counter access code. If you wish to
reset this total to 0, simply press “*”,”CLR” before exiting this mode.
ü
ü
To exit this mode, press “CLR”.
!
The unit’s Outgoing Call Counter access code has been set
to 12 at the factory, but it may be changed if you so desire.
Please refer to the section entitled “User Programmable
Codes.”
!
The number you enter as an access code should be
writ
ten
down and stored safely!
Accumulated Call Counter
This feature is used to check the accumulated number of calls. This
total will reset to 0 on the 10,000th call.
ü
ü
To check the number of calls made, press the
FUNCTION
key
“FNC”,”*”,”2”,”2” and enter registered 2 digit Call Counter access
code while the telephone is not in use. The accumulated number of
calls will appear in the display following the letters “C-C”. If you
wish to reset this total to 0 simply press “*”,
CLEAR
key “CLR”
before exiting this mode.
ü
ü
To exit this mode, press the
CLEAR
key “CLR”.
!
While the unit’s Call Counter access code has been factory
set as 12, it may be changed if so desired. Please refer to the
section entitled “User Programmable Codes”.
!
The number you enter as an “Access Code” should be
written down and stored safely!
Call Time Warning Tone
A time warning tone option exists that can be used to keep audible track
of the elapsed time spent while using your phone. The tone will signal
you as each minute passes during a call.
ü
ü
To toggle the Warning Tone on or off, press the
FUNCTION
key
“FNC”,”*”,”1” while not in use. The letters “Beep On” or “Beep OFF”
will appear in the display to indicate the mode’s current setting.
!
This mode can not be changed during conversation.
