16/33
“
5
” or “
6
” buttons to raise or lower the volume level respectively.
Ø
Note : When the speaker is on in Monitor mode, the handset earpiece is
off.
u
Memory Functions
Up to 89 numbers can be stored in the Memory Dialing System.
Each location can contain a number up to 32 digits in size.
Manual Storage
Telephone numbers may be stored manually into locations 01 through
89.
ü
ü
To use Manual Storage, enter the telephone number to be stored
and press the
STORE
key “STO”. The telephone number will blink
on and off until you enter a 2 digit location number 01 through 89 to
which the telephone number will be stored.
!
If the memory location number selected contains a previ-
ously stored telephone number the newly entered telephone
number will replace the existing one.
Automatic Storage
This feature is used to store telephone numbers in memory locations
automatically.
ü
ü
To use the Automatic Storage feature, enter the telephone number
to be stored and press the STORE key “STO” twice. The 2 digit
location number 01 through 89 to which the telephone number was
stored will he displayed for approximately 1 second
s
.
!
If there are no available locations the word
“FULL”
will be
displayed for seconds and the mode will be released.
Vacant Memory Location Search
This feature is used to search for unused memory locations to which
telephone numbers may be stored. The Vacant Location Search
function will try to place phone numbers in memory locations
automatically.
ü
ü
To use the Vacant Memory Location Search function, enter the
telephone number you wish to store and press the STORE key
“STO” At this point you may choose an ascending or descending
search order by pressing the “
5
” or “
6
” button respectively.
ü
ü
When the first vacant memory location is found
,
that memory
location’s number will appear
briefly
in the display panel
, on the line
above the phone number
. The telephone number about to be
