22/33
!
The display is “o-A xxxx:yy h:m”, where xxxx is hours and
yy is minutes.
!
The unit’s Outgoing Call Timer access code has been set to
12 at the factory, but it may be changed if you desire.
Please refer to the section entitled “User Programmable
Codes.”
!
The number you enter as an access code should be written
down and stored safely!
Cumulative Call Timer
The Cumulative Call Timer keeps a running total of on-line usage in
hours:minutes format.
This timer resets to 0000:00 after 9999 hours and 59 minutes have
been accumulated
ü
ü
To display the value of the Cumulative Call Timer, press the
FUNCTION
key “FNC”, “*”, “3”,”2”,
and enter registered 2 digit Call
timer access code.
ü
ü
To manually reset the call timer to 0000:00, press “*”, the CLEAR
key “CLR”.
ü
ü
To exit this mode, press the CLEAR key “CLR”.
!
The display is “C-A xxxx:yy h:m”, where xxxx is hours and
yy is minutes.
!
While the unit’s Call Timer code has been factory set as 12,
it may be changed if so desired. Please refer to the section
entitled “User Programmable Codes”.
!
The number you enter as an “Access Code” should
be written down and stored safely!
Temporary Accumulated Call Counter
This feature is used to check the temporarily accumulated (reset to 0 on
the 10,000th call) number of calls.
ü
ü
To check the number of calls made, press the
FUNCTION
key
“FNC”,”*”,”2”,”0”.
The temporarily accumulated number of calls will
appear in the display following the word “CALL”.
If you wish to reset this total to 0 simply press “*”, CLEAR key
“CLR” before exiting this mode.
ü
ü
To exit this mode, press the CLEAR key “CLR”.
Outgoing Call Counter
This feature is used to check the number of outgoing calls. It resets to 0
after the 10,000th call has been made.
