( 13 / 24 )
D4159008A
6.
Specification
[Electrical specification]
(1) Imager
all-pixel-data-readout interline transfer CCD
Number of total pixels
1434(H)
×
1050(V)
Number of effective pixels
1392(H)
×
1040(V)
Number of Video out pixels
1360(H)
×
1024(V)
Scanning area
6.47mm(H)
×
4.84mm(V)
(= Equivalent to 1/2” type CCD size)
Pixel size
4.65
µ
m(H)
×
4.65
µ
m(V) (Square-grid array)
(2) Scan method
Non- interlace
(3) Synchronization method
Internal synchronization
(4) Aspect ratio
4:3
(5) Video Output
Compliant with CameraLink standard version 1.2
Data
10 / 8 bit switching (factory default: 8bit
）
Readout mode
All pixel readout (factory default)
1360(H)
×
1024(V) [Approx. 19.5fps]
Partial Scan (ex.1)
1360(H)
×
768(V) [Approx. 25.0fps]
(ex.2) 1360(H)
×
512(V) [Approx. 34.8fps]
minimum lines: 6512, minimum step: 1 line
(6) Sensitivity
500 lx, F5.6
(7) Minimum subject illuminance
5lx F1.4 (GAIN: 10dB, video level: 50 %)
(8) Gain
0 to Approx. +12 dB [1step= Approx. 0.132dB]
(9) Setup Level (factory default)
40 ± 20 [digit] (10bit)
10 ± 5 [digit] (8bit)
(addition value)
+0 to +255 [digit] (10bit, 255 steps)
+0 to +63 [digit] (8bit, 255 steps)
(10) Gamma correction
OFF (
γ
= 1.0 fixed)
(11) Power supply voltage
DC12V ± 10% (ripple 50mV
P-P
or less)
(12) Power consumption
Approx. 1.8W (*Tentative)
[Internal sync signal specification]
(1) Driving frequency
36.00 MHz (1 CLK) ±100ppm
(2) Horizontal sync frequency
20.11 kHz (1H = 1790CLK)
(3) Vertical sync frequency
19.49 Hz
(maximum frequency on all pixel readout mode)
