TG-7 Cellular Series Installation & Operating Guide
25
56053501 Rev A © 2022 Telguard
Cellular-Only Wiring (With Telco Connection Through Second Panel DACT):
This configuration is used when the communicator is working in a system that also involves a Telco
connection or another communication path not connected through the Telguard communicator
(generally limited to fire systems). In this case, both the communicator and the alternate connections
are being monitored by the alarm panel. It is the alarm panel that determines which communication
connection to use for signal delivery.
ULC Compliance Note:
This configuration cannot be used with systems in Canada
.
LED1
LED2
LED3
LED4
LED5
LED6
LED7
LED8
FACP
TRIP
INPUT
EARTH
GROUND
AC
Plug-in
Adapter
Battery
NOTE 1
NOTE 1: Use either AC Power
(from Adapter) with Battery or
use DC Power (from Panel).
NOTE 1
INCOMING
TELCO
RJ-31X
A
n
te
n
n
a
Note: When using this scenario, the programming of the panel is what determines whether the
communicator is meant to work in a back-up or primary mode.
