TG-7 Cellular Series Installation & Operating Guide
i
56053501 Rev A © 2022 Telguard
Important Note
The registration form must be completed before leaving for the job site to install the Telguard
product. Use our dealer portal at
to register the unit in real time.
Foreword
Dealers purchase Telguard
®
cellular communicators for the quality, features and total value they
represent. The Telguard TG-7 Cellular Series devices (TG-7, TG-7A, TG-7FS, and TG-7UB) are UL
Listed for Commercial Burglary and, depending on the model, Commercial Fire systems. The Telguard
TG-7 models may be used in Retail or Commercial Burglary/Fire systems as the sole, primary or
secondary communication path.
Technical Support
Technical support for all Telguard products is available:
Toll Free: 800-229-2326, option 9
Monday Saturday, 8am 8pm ET
About this Manual
This manual assumes that you have basic security system installation skills such as measuring
voltages, stripping wire, properly connecting wires together, connecting wires to terminals, and
checking phone lines. It also assumes that you have a familiarity with the proper installation and
programming tasks related to various alarm panels.
The material and instructions covered in this manual have been carefully checked for accuracy and are
presumed to be reliable. However, Telguard assumes no responsibility for inaccuracies and reserves
the right to modify and revise this manual without notice.
It is our goal at Telguard to always supply accurate and reliable documentation. If a discrepancy is
found in this documentation, please send an email message to:
Or, write to:
Telguard Technical Services
3225 Cumberland Blvd
Suite 300
Atlanta, GA USA 30339
NOTE:
References in this manual to the TG-7 Cellular Series product should be
construed to apply equally to all models unless otherwise indicated. Similarly, unless
otherwise indicated, all information applies equally to either the AT&T or Verizon
model of any given product. The TG-7UB should be treated as the TG-7, TG-7A, or TG-
7FS product that is being updated; follow the Install instructions provided with the
TG-7UB to upgrade to the new board, then consult this Guide.
