Installation
Unpacking
Each SS1000 / SS2000 is supplied with the following items. Contact the shipper or
your Audiocom dealer immediately if anything is damaged or missing. Detach and
fill out the registration card and return it to Telex to properly register your intercom
station.
Quantity
Description
1
SS1000 or SS2000 Intercom Station
1
Warranty and registration card
1
User Instructions
Configuration Pre-check
Before making connections, read the configuration notes that follow, and make sure
that all internal controls are properly set for your intended usage. If you need to ac-
cess the internal controls, remove the four screws on the front that secure the inter-
com station faceplate to the mounting box, then lift out the faceplate. Figure
2
shows
the locations of the internal controls.
DIP Switches (Figure
2
, item 2)
Table
1
lists the DIP switch descriptions and factory default settings.
DC Call Enable (DIP Switch 2)
For Audiocom setup, leave this switch in the open position, and also leave the Bal-
anced / Unbalanced switch (Figure
2
, item 13) in the Balanced position. For
Clear-Com setup, set DIP switch 2 to the closed position and set the Balanced / Un-
balanced switch in the Unbalanced position.
8
Au d i o c o m ®
