5.
SS2000 only: activate channel 2 and repeat the above steps to adjust the channel
2 sidetone.
6.
Install the intercom station mounting screws after completing the adjustments.
The station is now ready for use.
If you are using headphones that completely enclose the ears, adjust sidetone as
follows:
1.
SS2000 only: activate channel 1 as described in the operating instructions on
page
22
.
2.
Activate talk and listen as described in the operating instructions.
3.
Set the volume control to the normal listening level for intercom audio.
4.
While talking into the microphone, use a small flat-bladed screwdriver to adjust
the channel 1 sidetone trimmer (Figure
1
) so that you can hear your own voice in
the headphones at an acceptable level.
5.
SS2000 only: activate channel 2 and repeat the above steps to adjust the channel
2 sidetone.
6.
If the intercom station will be mounted in place, mount the case back as de-
scribed below before reinstalling the faceplate. If the “S” box or “P” box version
will be used in a portable configuration, you may reinstall the faceplate in the
case and proceed to the operating instructions.
2 1
