Speaker Beep for Incoming Call (DIP 5)
Set DIP switch 5 to the Closed position if you want to hear incoming call beep in the
speaker. Note that DIP switch 3 must be in the Open position.
Balanced/Unbalanced Switch (Figure
2
, item 13)
This switch is set at the factory to the Balanced, or BAL, position for use with
Audiocom intercom channels. Set the switch to the Unbalanced, or UNBAL, position
for use with a Clear-Com intercom system.
Sidetone Trimmers (Figure
2
, item 12)
These are normally adjusted after all connections are completed. See "Sidetone Ad-
justment", page
20
.
1 0
Au d i o c o m ®
