Telex RadioCom BTR-700, Operating Instructions Manual

Page: 33 / 68

Power-Up Screen
•
This screen is dis played only on power-up, first use de -
fault, and fac tory de fault.
•
The 1
st
up per right cor ner num ber dis plays the base’s soft -
ware re vi sion. The ver sion num ber in cre ments for
changes in op er a tional soft ware.
•
The 2
nd
up per right cor ner num ber dis plays the base’s
chan nel map (fre quency plan) ver sion. The ver sion num -
ber in cre ments for changes in the chan nel map.
•
Once the power-up screen is dis played, it will change to
the op er at ing screen af ter a few sec onds.
Op er ating Screen
•
Screen is dis played af ter power-up screen.
•
Sys tem will re vert to this screen if no ac tiv ity is de tected
on the LCD dis play but tons af ter 3 min utes.
•
Screen dis plays cur rent sta tus of the sys tem.
Beltpack Ac tiv ity Code Def i ni tions:
6-5
Telex
RadioCom
S
TM
C60001
B20001
Group 03A
T1
4
R1
tx
On
Off
Tx
Tx
Operating Screen
2
3
Tx
no
no tx = No Beltpack Trans mit Car rier De tected
Off
= Re ceiver is not se lected on front panel
Tx = Beltpack is on
Power-Up Screen