Telex Audiocom ES4000A, User Instructions

Page: 22 / 30

Installation
20
Cables
The numbers below correspond to the cable numbers in the connection drawings on the previous pages.
1.
1-channel intercom cable. Sold separately. Use Telex “ME” cables, below. Or, build per Figure 14 on page 21.
ME-25: 25’ (7.6m) cable with Male and Female 3-pin XLR connectors.
ME-50: 50’ (15.2m) cable with Male and Female 3-pin XLR connectors.
ME-100: 100’ (30.4m) cable with Male and Female 3-pin XLR connectors.
2.
2-channel intercom cable. Sold separately. Use Telex “ME/2” cables, below. Or, build per Figure 14 on page 21.
ME-25/2: 25’ (7.6m) cable with Male and Female 6-pin XLR connectors.
ME-50/2: 50’ (15.2m) cable with Male and Female 6-pin XLR connectors.
ME-100/2: 100’ (30.4m) cable with Male and Female 6-pin XLR connectors.
3.
Y adapter cable. Sold separately. Use Telex CA-23-16. Or, build per Figure 14 on page 21.
4.
3ft. (0.91m) speaker cable with RCA plugs. One supplied with each SPS2000A. SPK-1000, and SPK-2000.
5.
18” (457mm) CHANNEL OUTPUT cable, stereo miniplug to stereo miniplug. One supplied with each ES4000A.
6.
18” (457mm) CHANNEL OUTPUT cable, 15-pin Male Dsub to 15-pin Female Dsub. One supplied with each ES4000A.
7.
Shielded patch cable, 9-pin Male Dsub to 9-pin Female Dsub. Customer, local purchase: available at most electronic
stores. Note: All pins must be connected straight through: do not use an RS232 computer cable.
8.
Shielded patch cable, stereo miniplug to stereo miniplug. Customer, local purchase: available at most electronic stores.
9.
Shielded audio cable. Must have male 3-pin XLR connector at one end for connection to the XP-USPG or XP-4PGM
program inputs. Pin-out for program inputs is as follows:
Pin 1: common
Pin 2: + program input
Pin 3: - program input
10.
Shielded audio cable. Must have male 3-pin XLR connector at one end for connection to the XP-USPG output. Pin-out for
PS output is as follows:
Pin 1: common
Pin 2: + program output
Pin 3: - program output