9
Installation
The inputs and outputs are fully balanced on XLR connectors and are wired conventionally with pin 1
as ground. Because the system is fully floating, either pin 2 or pin 3 can be designated as hot so long
as the same protocol is adhered to for both the input and the output connectors.
The DN3601 is designed for use in both fixed and mobile installations where it can be mounted in a
conventional 19 inch rack occupying just 2U of height. In mobile situations where rough handling is a
possibility, it is advisable to support the rear of the unit to prevent undue stress being placed on the front
panel. Ensure that the unit has sufficient ventilation and that it is not placed directly over any device which
runs hot such as a power amplifier or console power supply.
