TSP104 User Manual -------------------------------
Revision on January, 2009 Page
11
[
IP STREAMING
(EXPERIMENTAL)]
To do
network streaming
:
Set
INPUT SOURCE
as
IP/SEND(or FILE)
and click
PLAY
button. If
IP/SEND
can’t be selected or there are some errors, refer to the
IP OPTION
.
To receive stream from network, set
INPUT SOURCE
as
IP/RECV
and click
PLAY
button. To record stream from network, set
IP/REC
and
PLAY
button.
When playing a stream to/from network, the current input/output bit rate is shown
as following label “
IP ###### bps
”.
In case of receving stream from network by using TPG0###.exe, if the current
input bit rate is less then the current PLAY RATE, RF and ASI/310 output may be
discontinuous for a seconds. So, reset the PLAY RATE
as the averaged or current
input bit rate.
The program information of multi-programmed stream is shown at the message
box as like “
PGM #1, 1/2/3/4
” on playing. And, the following combo box will be
shown. A selected program will be sent during IP streaming.
If the followng
Errors
window is shown, refer the message and check the
IP
OPTION
information whether the output and input are correct.
