background image

TSP104 User Manual -------------------------------

 

Revision on January, 2009                                                                                      Page

10

 

 

Refer VLC(version 0.8.6b) streaming manual from 

http://www.videolan.org

All functions depends VLC and the known problems will be patched as 
release versions. 
 
To use 

IP STREAMING 

normally, refer the “[

IP STREAMING

 

(EXPERIMENTAL)]

 

To do 

network streaming

:” at 

ADJUST 

DEMODLATOR

 

RECORDING STREAM 

 Select “

INPUT SOURCE

”. 

 Click the “

RECORD STREAM

” button. 

 On recording, the recorded stream’s size is shown at “

PGM SIZE

”. 

 

PLAY RATE must be sufficiently greater than the expected input bitrate

The buffering time can increase or decrease as the 

PLAY RATE

 
 

CONTROL MULTI-BOARD CONFIGURATION  

Using an application version that the below red circled menu is enabled, all boards 

are controlled at the loaded application currently.

 

 

 When the multiple boards are installed and one wants to control another board, 

click the red-circled label. Then the selected board’s parameters will be shown on 
the screen. 

  And, the other bottom menus are selectable too.  

 

ADJUSTING DEMODULATOR 

  One can adjust demodulator parameters on 

 “

OFDM (8-VSB/QAM-B

 or 

ISDB-T) DEMODULATOR

” grouped-box. 

  In case of “

8-VSB/QAM-B

” type, “

SNR

 

is updated per 500msec. 

  In case of “

OFDM

” type, “

SNR

/

BER

 

is update per 500msec. If it is unlocked, 

FEC

/

TPS

/

AGC 

information is updated. 

  In case of “

ISDB-T

” type, “

SNR

/

BER

 

is update per 500msec. 

  “

RF

” means 

Ce

nter Frequency

 

  
 
 
 
 
 
 
 
 
 
 
 

Summary of Contents for TSP104














Reviews: