TLV-300E/TAV-900A Professional Digital TV Receiver
User’s Manual
MAIN/CAPTION/ACTIVE/EIA-
708B
Select Caption Service for DTV caption (EIA708). Service 1 ~
Service 7.
MAIN/OSD
Enable or disable OSD on MAIN display (PSIP display,
FAULT status display and Volume bar, Constellation,
Colorbar)
3.2.2.1 CONFIG/MAIN/SOURCE sub-menu
The SOURCE sub-menu allows you to change the source of input for MAIN video. User can select value
AUTO SELECTION, RF-IN1, RF-IN2, BNC-1, BNC-2, BNC-3, BNC-4, and BNC-5.
AUTO SELECTION chooses valid input automatically. When 2 or more input is valid, the setting
CONFIG/PRIORITY is used to choose one out of them.
CONFIG/AUTO SELECTION DELAY is used to determine how long the receiver wait when current source
lose valid signal.
Direct numeric key entry performs source selection first. Automatic selection will be switched to RF-IN1 or
BNC-1~5 depending on the values entered by numeric buttons.
3.2.2.2 CONFIG/MAIN/VIDEO sub-menu
VIDEO: The VIDEO sub-menu allows you to change setup of video. There are DISPLAY
MODE, DISPLAY
TYPE, FRAME RATE, ASPECT RATIO, SCREEN MODE sub-menus.
DISPLAY MODE: The DISPLAY MODE sub-menu allows you to change the output display mode. Note that
SDI signal is valid only for 1080i, 720p, and 480i 29.97 Hz video outputs and the composite signal is valid
only for 480i video output. The types are following:
1080i
The output is fixed to 1080x1920 interlaced and any incoming
video will be converted to this format.
720p
The output is fixed to 720x1280 progressive and any incoming
video will be converted to this format.
480p/576p
The output is fixed to 480(576)x720 progressive and any
incoming video will be converted to this format
480i/576i
(NTSC / PAL)
The output is fixed to 480(576) x720 interlaced and any
incoming video will be converted to this format. This is also
known as NTSC/PAL.
The video mode should be selected carefully because if your display (output) doesn’t support the
incoming signal, you won’t see any image on the display.
DISPLAY TYPE: The DISPLAY TYPE sub-menu allows you to change the output for MAIN video. Types
are YPbPr and RGBHV.
FRAME RATE: The FRAME RATE sub-menu allows you to change the frame rate of the video. Choose the
Version 2.0
31
