Televes TOX Series, User Manual

Page: 17 / 32

EN
17
b. Frequency steps menu
This menu lets you select the frequency steps that
will be applied at the input and output. Possible
options are 125 KHz or 166 KHz.
FREQ. STEP
In: 166KHz
Out: 166KHz
c. Identifi er menu
Some DVB-T receivers can present problems
receiving transmodulated channels which share
the same identifi er (
transport_stream_id ). To avoid
these cases the user can change the following
DVBT output multiplex identifi ers:
transport_stream_id (ts_id)
network_id (n_id)
original_network_id (on_id).
You can choose Auto mode (the identifi ers do not
change) or Manual mode.
When switching from Auto mode to Manual the
identifi ers received at the input are displayed and
the user can change them.
NIT IDs
Auto
IDs Manual
ts_id:0x04fC
n_id: 0x055F
on_id:0x055F
d. Versions menu
In this menu the user is shown the fi rmware
versions for the unit and the COFDM (FPGA)
modulator.
VERSION
Fw: 1.00.11
Mod: 1.00.11
e. LCN menu
The next menu allows you to assign a channel
number (LCN, Logical Channel Number) to the
existing services at the output, marked ON or
DCY in the services menu. LCN can be useful for
compatible receivers.
If the service already has an assigned LCN in the
input it is allowed to change or remove the LCN in
the output tables, selecting 0000 as the LCN. “NO
LCN” will be shown.
LCN 1/3
Teledeporte
N:0001
LCN 1/3
Teledeporte
NO LCN
To change the LCN press keys and or .
f. Language menu
The last extended menu enables the menu
language to be selected (Spanish / English /
German / French):
LANGUAGE
English
Pressing keys and changes the selected
language.