Televes T.0X 565301, User Manual

Page: 21 / 48

EN
21
8.2 - Configuration menus (LED B is ON)
This section includes a number of less frequently
used configuration options and is indicated by LED
B on the Programming Unit.
Every parameter configured in this section applies
to both tuners.
Working mode selection
Use this menu to set the desired working mode of
the unit.
SELECT
WORKING
MODE
PROCESSING
The possible options are:
- TRANSPARENT. No processing is done on the input
signal, which is transparently transmodulated
from ATSC or QAM into the desired QAM output
modulation. No service name or VCN edition is
allowed.
- PROCESSING. If QAM annex B is selected as
output standard, limited PSIP edition is possible.
This includes the selection of the output VCT
table type, VCN format, service name and VCN.
If the selected output standard is QAM annex A,
only the service name will be editable.
- MULTIPLEXING. In addition to the PSIP edition
of PROCESSING mode, the user can select the
output for each input service, or if the service will
be eliminated, thus enabling the multiplexing/
removal of services. When entering this mode,
output B is automatically set to MUTED and all
services are directed to output A.
Input frequency mode
Using this menu the user can select one of the
modes available to program the input frequency:
SELECT
INPUT FREQ
MODE
BROADCAST
- MANUAL: The user has to manually enter the
input frequency in MHz.
- CATV: The US standard cable TV channel plan is
selected.
- BROADCAST: Over-The-Air US channel plan.
- T-CHANNELS: channels T-13 and T-14 can be
selected as QAM inputs. This option is provided
only when both tuners are set to QAM modulation
input.
Output QAM mode selection
Use this menu to select the desired QAM standard
mode, annex A or annex B.
SELECT
OUTPUT QAM
MODE
ANNEX B
The unit will reboot after a change in the QAM
output mode.
If the selected standard is annex B and the unit is in
PROCESSING or MULTIPLEXING mode, the output
VCT table type, VCN format, service name and VCN
can be modified.
In case of annex A and PROCESSING or
MULTIPLEXING mode, only the service names will
be editable.
Output frequency mode
Using this menu, the user can select one of the
modes available to program the output frequency:
SELECT
OUTPUT FREQ
MODE
BROADCAST
- MANUAL: The user has to manually enter the
output frequency, between 12 and 1002MHz.
- CATV: The US standard cable TV channel plan is
selected.
- BROADCAST: Over-The-Air US channel plan.
- T-CHANNELS: channels T-8 to T-14 can be selected
as QAM output.
Output loop mode selection
Use this menu to select whether the output RF