User instructions
7229
22
Installation
TV
TV
VCR
Decoder
7229
7260
Decoder
7229
7260
•
It is strongly recommended not to
connect to the mains any equipment
before the installation is totally
finished.
Install the receiver
1.-
Connect to LNB and Dish Via coaxial cable.
2.-
Connect TV set to TV Scart Socket.
3.-
Connect VCR, or Decoder to VCR, or Decoder Scart
socket.
Video level Adjust
1.-
Adjust for proper picture brightness, by using a small
screw driver.
•
To prevent electric shock, do not
remove covers.
•
Do not cover the ventilation slots on
the cover of the receiver.
•
Protect the receiver against heat
dust, humidity water and direct
expose to sunshine.
•
Do not use any chemical detergents
for cleaning.
•
For servicing, always contact a
specialist service shop.
•
Do not operate it on a soft surface
(such as carpet)
•
Only connect the receiver to the AC
system and switch it on once all the
connections have been set up.
•
In the event of a prolonged absen-
ce, pull out the mains plug to dis-
connect the receiver from the power
mains.
Cautions
