Televes H30 CRYSTAL, Instruction Manual

Page: 35 / 40

EN
35
If you press BACK, you can use your H30Crystal.
If you press OK, it will begin the registration
process:
The user can choose to use his / her mobile phone
to read the QR code, or use the Register function
of the H30Crystal App (note, the mobile device
which the app is running on, must have access to
the internet).
i)If you use your mobile phone, read the QR code
using the camera. Then a web browser will be open
with the Televes Meter Registration web page. Re-
gister your H30Crystal in our web. Once the pro-
cess is completed, you will get a PIN code by email.
Enter the PIN code in your H30Crystal:
ii) If you choose to use the app to register your
H30Crystal, you first have to connect your
H30Crystal with your mobile device. To do that,
press BACK to leave the registration process for a
moment and follow the instructions explained in
the section 1.- Connection between the App and the
H30Crystal .
Then turn your H30Crystal OFF, and then ON again
to start the Register process.
Select Settings->Register menu in the App.
Now you must disconnect your mobile device from
your H30Crystal and connect it to the internet.
Then it will be open a web browser with the
Televes Meter Registration web page. Register
your H30Crystal in our web. Once the process is
completed, you will get a PIN code by email.
Enter the PIN code in your H30Crystal:
2.4.4.- Clone
Using this feature it is very easy to have the same
configuration in all your H30Crystal meters.
You only have to export the configuration of the
H30Crystal that you want to copy, using the Export
feature. So, the configuration will be saved in a file
on your computer.
Make sure that the icon is green
Copy the H30Crystal
configuration in a file defined
by the user