Televes H30 CRYSTAL, Instruction Manual

Page: 13 / 40

EN
13
2.2. Setup
Press to change the Channel Info options.
- Band: Terrestrial/Satellite
-
Plan
: Selects the channel plan
- Powering : Selects the LNB powering
-
DiSEqC (only satellite band)
: Selects DiSEqC
parameter (Sat A, sat B, sat C, sat D)
-
SCR (only satellite band)
: Selects the SCR
parameters (multiswitch, standard and slots)
When a slot is enabled (for example slot 3,
freq. 1210MHz), the meter will tune into the
slot frequency (1210MHz) and will set the slot
with the meter parameters: frequency, band
(powering), and DiSEqC. In addition, a SCR
icon will be shown in the bar at the top (SCR3)
to indicate that the slot is enabled.
While the slot is enabled, all the setting
changes of the meter, will be applied to the
currently slot (SCR3).
-
Tuning
: Channel, Frequency
-
A/D
: Auto, Analog, Digital.
- Save datalog : Saves the current scan
measurements. You can see the datalogs
using the remote control application.
3. Spectrum
Real-time processing speeds ensure capture of any
fast, intermittent plant impairments.
Due to the accuracy and level of detail provided by
this spectrum analyzer, the H30Crystal is the ideal
tool for identifying and locating noise, interference,
ingress and other waveforms that may be affecting
cable services quality.
3.1. Main window
Below is a capture of a Spectrum window with a
brief explanation of its features:
3.2. Setup
Press to change Spectrum options.
- Band: Terrestrial/Satellite
- Plan : Selects the channel plan
-
Powering
: Selects the LNB powering
- DiSEqC (only satellite band) : Selects DiSEqC
parameter (Sat A, sat B, sat C, sat D)
-
SCR (only satellite band)
: Selects the SCR
Span
User can change it using
( + )
or (
-
)
List of
measurements
with pass/fail
indicators
Reference level
Change
Selected channel
Change using