CoaxBox - User Guide
Ref.769330
19
AccessControl Web interface
The first step required of the installer is to configure the access control system indicating operating parameters.
This step is performed via un port Web.
•
Opening a browser and indicate the address:
http: //
<CoaxBox_IP>
: 15708
•
Use the following account to access.
user:
Admin
password: Televes1
.
Enable/Disable AccessControl Service
By default CoaxBox start AccessControl service at startup.
Use the Web management to configure this CoaxBox service. Go to
System> Bootup and Shutdown
select
service called coaxdataaccesscontrol and click on start/stop/install/uninstall button.
Multiple CoaxData AccessControl on the same network segment are not allowed!
In case there are several AccessControl applications running on the same network segment,
use service options to disable service on all CoaxBox except one.
Service can also be configured through ssh terminal.
# To start the service
coaxdataservices root @: ~ # /etc/init.d/coaxdataaccesscontrol start
# To stop the service
coaxdataservices root @: ~ # /etc/init.d/coaxdataaccesscontrol stop
#
To install the service (it will start on CoaxBox bootup)
coaxdataservices root @: ~ # update-rc.d coaxdataaccesscontrol 50 defaults 20
# To remove the service (it will not start on CoaxBox bootup)
coaxdataservices root @: ~ # update-rc.d -f coaxdataaccesscontrol remove
E
N
G
L
IS
H
2017 © Copyright, Televés S.A.
www.televes.es
Summary of Contents for CoaxBox
Page 1: ...Ref 769330 CoaxBox User Guide EN ...
Page 21: ......
