Televes
18
CoaxData AccessControl
The application
CoaxAccessControl™
allows setting
CoaxData™
devices in a simple and intuitive way to
establish different parameters of access to coax medium, check installation status and link quality between
devices.
Installation diagram
Main Features
Configure the access mode of the coaxial modems
CoaxData1Gbps
the medium such that can enable /
disable a device and set parameters such as access bandwidth and user limit modem.
check
installation status
determining the rate links between different devices.
Alarm generation
to notify the user of any impact on the system as a link loss of a device or poor
quality, and access to the current network situation by implementing an SNMP agent.
The system configuration can be done by
SNMP protocol
or through a simple Web interface for users
without technical knowledge of this protocol. For this it provides a complete specification MIB defines all
SNMP objects implemented by SNMP agent.
Automatic generation of e-mails
that enable ongoing monitoring and warning for major incidents in
both the management system itself as devices to manage.
Multiple CoaxData AccessControl on the same network segment are not allowed!
Depending on the characteristics of your network, you may need to segment the monitoring
and install several CoaxBox in your installation.
Only one AccessControl can be enabled.
See bellow instruction to enable/disable AccessControl con CoaxBox.
E
N
G
L
IS
H
2017 © Copyright, Televés S.A.
www.televes.es
Summary of Contents for CoaxBox
Page 1: ...Ref 769330 CoaxBox User Guide EN ...
Page 21: ......
