A v a n t P C P r o g r a m m i n g I n t e r f a c e
37
ENGLISH
2.3.- The adjustment screen
This automatically adjusts the Avant unit to the specified parameters. Firstly, the
FM adjustment is carried out, then the VHF adjustment and finally each of the UHF
channels are adjusted. If the level is not the optimum level in each adjustment, in
other words if the level is too high or low, the system informs the user and allows a
readjustment process to begin, whereby the installer can carry out the necessary
changes in the installation and readjust it to obtain the optimum level. If you do not
wish to readjust, there is the option of continuing without readjusting.
In the digital version of the Avant, the graph shows the digital channels (66 to
69) with different levels from the analogue.
As the adjustment is carried out, the results appear on the right-hand side.
The middle section shows the adjustment of the UHF channels with its equali-
sation slope. If the channels have been adjusted correctly they are shown in green
whereas if they haven’t been adjusted correctly, with levels that are too “LOW” or
“HIGH” they will then appear in red.
This is the adjustment screen:
