32
LNB Powering
You can select the powering of the LNB through the input connector of the IF
amplifier at 13 Vdc,17 Vdc or Off.
2.1.3.- Main screen buttons
Read Avant configuration
It is possible to read the configuration of the Avant unit that is connected to the
computer. The configuration that is being read appears on the main screen.
Record configuration in Avant
You can record the configuration shown on the main screen in the Avant’s
memory.
It is necessary to point out that the configuration is recorded directly into the
memory without any type of adjustment as to carry out an adjustment you must use
the “Adjust Avant” button that is explained in detail later on.
