9
Ref. 7664
ENGLISH
Powering connector
To connect the external power supply of
15V/800mA
that comes with the product.
Master / Slave switch
At the back of the ethernet-coaxial adaptor 128Mbps, you will find this switch that lets you
select the operating mode (master or slave mode).
Remember to take into account that one of the adaptors must be set to master mode and
the rest to slave mode.
2.1.- The LEDs
Power
LED (green) will light up when the adaptor is connected to the power supply.
Sync Mode
If the adaptor is in
master
mode, this LED (red) will be switch on
permanently
, whether
there are adaptors in slave mode or not.
If the adaptor is in
slave
mode, this LED will only light up when connected to the master
adaptor. Because of this, it is necessary to make sure that this LED is switch on.
Coax Link
LED (yellow) that will only flash on and off when data is being transmitted or received.
Coax Link
Sync Mode
Power
234614
ETHERNET-COAX ADAPTER
Ref. 7664
Coax Link
Sync Mode
Power
234614
ETHERNET-COAX ADAPTER
Ref. 7664
ETHERNET-COAXIAL ADAPTOR 128 Mbps
4
5
1
2
3
