ENGLISH
that correspond to the bandwidths 130kHz,
180kHz, 200kHz, 280kHz, 380kHz 500kHz
and automatic selection, respectively.
e.- Video mode
The following menu to appear is the
video
mode.
This lets you choose the operation
mode, Normal or Inverted video by means of
the and buttons.
Normal Inverted
f.- Audio level
The user can access the following menu by
pressing the
button; this is the
audio
level menu.
It is possible to vary the para-
meter from -9 to +12dB. There is also a
MUTE option. Existing values: MUTE, AL-9,
AL8, ...AL00, AL01..., AL11, AL12.
g.- Audio subcarrier
By pressing the
button again, the selec-
tion menu for the
audio subcarrier fre-
quency
in Mhz is displayed. The possible
values, that are selected using the
and
buttons are 4.5, 5.5, 6.0 and 6.5 MHz. For
example, for 5.5 MHz:
Note:
If you are using a Quatro type converter, it is
advisable to power it through each of the
possible outputs that will be used, and to
program and activate a 13V current and de-
activated tone in the corresponding modu-
les.
b.- Audio mode
The following menu that appears is the
audio
mode
. It lets you choose the operational
mode, either stereo or mono by means of the
and buttons.
Stereo Mono
c.- FM de-emphasis
The following menu that appears is the
de-
emphasis selection menu.
Using the
and
buttons, you can choose between 50µ,
75µ, J17, PANd (Wegener-Panda) or OFF.
d.- Demodulated bandwidth
The following menu lets you select the
audio subcarrier bandwidth.
Using the
and
buttons you can select the options
b130, b180, b200, b280, b380, b500, AUTO
5.2.- Extended menus
By pressing the
button for more than
three seconds, you can access the exten-
ded menus:
a.- LNB powering
The following extended menu is the
LNB
powering mode
and the selection of the
22
KHz tone
. The are 5 possible options that
can be selected by pressing the
and
buttons. These select the powering voltage
of the LNB via the input signal of the modu-
le. The 22 KHz tone is also chosen in this
way:
LNB not powered. No tone
LNB powered at 13V. Tone activated
LNB powered at 13V. Tone de-activated
LNB powered at 17V. Tone activated
LNB powered at 17V.Tone de-activated
29
User manual
SAT-RF
