manualshive.com logo in svg

Televes 593581, Instruction Manual, Page: 31 / 37

Share
Download
Televes 593581 Instruction Manual Download Page 31

EN

31

Error Messages

LOW BATTERY

Indicates that the battery is about to finish. The 

battery icon is red now. It is recommended to 

connect the meter to the external power source.

LOW BATTERY

Shutting down

Some time after the LOW BATTERY message 

appears (time varies depending on the functions 

used), it will appear this message. If the meter is 

not connected to the external power source, it will 

switch off.

BAD POWER

Unplug power source

This message appears when the meter is 

connected to an external power source that does 

not supply it the right power. Please, use only the 

power source provided with the 

H30Evolution

.

SHORT-CIRCUIT

Check installation

This message appears when the meter detects a 

short-circuit at the RF input. It is recommended to 

check the installation to find out why the short-

circuit is produced.

DC OUTPUT LIMIT EXCEED

Switch DC OUTPUT off

This message appears when the meter detects 

an excessive consumption from the device that is 

being powered. It is recommended to turn off the 

powering feature of the 

H30Evolution.

DC AT RF INPUT

Check installation

This message appears when the meter detects 

DC at the RF input that is not generated by the 

H30Evolution

. It is recommended to check the 

installation.

Maintenance

Always disconnect the unit before cleaning. Use 

only a mild solution of detergent and water applied 

with a soft damp cloth. Dry thoroughly before use.
Do not use aromatic hydrocarbons or chlorinated 

solvents. These products may damage the unit.
Do not use alcohol or alcohol based products 

on the front panel, especially the display. These 

products may damage the unit.

Summary of Contents for 593581






































Reviews:

No comments