Televes 593581, Instruction Manual, Page: 19 / 37

EN
19
- Wi-Fi: Allows to connect the H30Evolution to
a Wi-Fi network.
Wi-Fi: On, Off
Mode:
AP (Access Point), Client
Scan : When Wi-Fi is turned on and the
selected mode is Client, it shows a list of
all the found Wi-Fi networks.
As you can see in the image above, the list
shows the name of the Wi-Fi networks and
indicates if the network is open or restricted,
as well as the protection access type.
To access to a restricted network, you must
enter the password using and
To verify the password, find a red square
behind the last character of the password
and press
MAC : The MAC can be set automatically
or user-selected
Setup : Auto, Manual
MAC
: When Setup Manual is selected,
the user must enter the MAC using
and
SSID: Shows the SSID of the H30Evolution
BSSID:
Shows the SSID of the
H30Evolution
IP:
Shows the SSID of the H30Evolution
- Bluetooth: Allows to turn ON/OFF the
bluetooth connection.
If ON is selected, it will appear a new line
showing the MAC of the H30Evolution
Bluetooth interface, and a bluettoth icon
will be shown in the top right part of the
screen.
When the equipment connects via bluetooth
with another device, it will appear another
line showing the MAC of the other device
- Time and Date :
Set current time (hour and minutes) and
date (month, day, and year).
- Energy:
Auto suspension
Auto shutdown
- Update firmware:
See section Firmware
update
- Reset configuration:
Resets the
H30Evolution to factory settings
- Licenses:
Shows a list with all the licenses
included in your H30Evolution
- About SW
- About HW