Televes 593501, Instruction Manual

Page: 20 / 37

H30EVOLUTION handheld DVB meter /
Analyzer
20
11. Setup
Change main configuration settings:
- Band : Terr, Sat
- Ter. Network:
Aerial, Cable
-
Terr Plan
: FCC STD, FCC RETURN, FCC IRC,
FCC HRC, FCC OFFAIR, CCIR, and customers
plans
- Sat Plan : F68E INTEL C, 68E INTEL, 42E TURK,
39E HELLAS, 33E EUTEL, 28E EUTEL, 28E
ASTRA, 26E BADR, 25E EUTEL, 23E ASTRA, 21E
EUTEL, 19E ASTRA, 16E EUTEL, 13E HOTB, 10E
EUTEL C, 10 EUTEL, 9E EUTEL, 7E EUTEL, 4E
ASTRA, 1W THOR5, 1W THOR6, 5W EUTELC,
5W EUTEL, 7W NILE, 30W HISPA, 48W AMZC,
48W AMAZ, SIM, and customers plans
- Sat. Freq.: IF, real Freq.
- Sat. LNB: Universal, C Band, Other.
If Other is selected, you must enter the
frequency.
-
Restore Powering
: On/Off
- Language : English, Español.
- Units : dBµV, dBmV, dBm
-
Quality profiles
: Trunk, Tap, End Line,
Ground.
Different thresholds are available for different
testing locations.
- Analog Standard:
Selects the standard
for the analog channels and changes
automatically the audio carrier to a value
according to the selected standard.
- Audio Carrier:
4.5 MHz, 5.5 MHz, 6.0 MHz,
6.5 MHz.
- Volume
- Network:
Setup
: Manual, Auto
When Setup Manual is selected, the user
must set the gateway.
IP .
When Setup Manual is selected, the user
must set the IP.
DNS
.
When Setup Manual is selected, the user
must set the DNS.
Gateway
.
- Wi-Fi: Allows to connect the H30 to a Wi-Fi
network.
Wi-Fi: On, Off
Mode: AP (Access Point), Client
Scan
: When Wi-Fi is turned on and the
selected mode is Client, it shows a list of
all the found Wi-Fi networks.
As you can see in the image above, the listo
shows the name of the Wi-Fi networks and
indicates if the network is open or restricted,
as well as the protection access type.
To access to a restricted network, you must
enter the password using and
To verify the password, find a red square
behind the last character of the password
and press