Getting Started
© 2008 TeleType Co.
11
2.2
Navigation Overview
Now that you are familiar with WorldNav features you
are ready to begin navigating. When you turn on your
device the GPS will search to acquire satellite signal.
Once you have picked up signal you can simply press
<Where To> and enter a destination to navigate from
your current location. If you are indoors or unable to
pick up satellite signal, you may want to set your home
address manually. You can also create routes by
entering start and end addresses for later use.
When you are driving, the screen will display your
location in route and you will be given voice
instructions for when and where to turn. Your
destination will be indicated on the map with a
checkered flag. Once you have reached your
destination the route will be cleared and will be ready
to navigate to your next destination.
© 2008 TeleType Co.
WorldNav Navigation Software
12
2.3
Map Mode
The WorldNav software allows you to switch
between Navigation and Map mode. You will
automatically be in Navigation mode when you
travel with the GPS locked into position. If you
care to browse the map, simply touch the screen
anywhere on the map area, you will then see a
plus and minus symbol which will allow you to
zoom in and out. You can use your finger to drag
the map in any direction as desired. Road colors
will vary based on the type of road. For example,
in Day Mode, the colors of the roads are as
follows:
Gray - Residential
Yellow - County or State
Orange - Highway
Green - State Preferred Truck Route
Pink - Truck Restricted Road
When you see "Where To" and "Menu" on the
screen that means you are in "Map" mode.
Getting Started
© 2008 TeleType Co.
13
Map Mode
When those software buttons disappear it means
you are in Navigation mode and the map will
automatically orient in the direction of travel. The
following picture show navigation mode with a
route in progress.
Navigation Mode
© 2008 TeleType Co.
WorldNav Navigation Software
14
2.4
Set Home Address
When you travel away from home it is convenient
to be able to route "Home" easily. You need to
set your home address in the "My Points"
Submenu by pressing <Set Home>. Follow these
directions.
Main Mapping Screen
1. Press <Where To> on the main mapping
screen, which will take you to the Find Wizard
Menu. You will be prompted to select one of
the following: Services, Address, Home,
Intersection, History or My Points. Select
<Address>. Note: You can also get to the
Find Wizard Menu when you press <Find> in
the main menu.
