Getting Started
© 2008 TeleType Co.
43
2.10 Reroute and Clear Route
When you stray from the intended route the GPS
will attempt to re-route you. You have a choice as
to when you want this to occur. You can decide
whether you want the GPS to reroute you
Immediately when it thinks you have strayed from
the route, or whether it should wait until you are a
little farther off the route (to compensate for GPS
fluctuation) before the GPS tries to reroute you.
You might want to experiment with these settings
for your particular situation. When you create a
new route the old route will automatically be
replaced. If for some reason you do not wish to
follow a route, you can clear the existing route
from the screen, press <Clear Route>.
Route Menu First Page
Press the right white arrow found at the bottom of
the screen to get to the next screen.
© 2008 TeleType Co.
WorldNav Navigation Software
44
Route Menu Page Two - Settings
Select Reroute the desired re-route settings using
the white spin arrows. Selecting "Immediate" may
result in unnecessary re-routes, whereas
"Conservative" will delay the reroute from
occurring until you are further off the route.
Select Reroute
Getting Started
© 2008 TeleType Co.
45
2.11 Your GPS Settings
GPS Information
Press <Menu> to get to the main menu and then
scroll to the third by pressing the right arrow icon
twice. Press <GPS Status>. This will bring you to
the GPS information screen showing your
latitude, longitude, elevation, speed, heading
(direction of travel), date/time, the total number
and strength of satellite signals. The green dot on
the bottom right of the panel indicates the GPS is
locked in. The dot will change colors based on
the following status: Red - not locked in, Yellow -
Acquiring Satellites, Blinking Green - getting close
to locking in, Green - position fixed. The same
dot colors will also appear on the bottom right
hand side of the map screen providing a quick
indication of the GPS status. Note: See Section
4.7 to adjust time.
GPS Information Screen
© 2008 TeleType Co.
WorldNav Navigation Software
46
(Note: If you are using a device other than
portable WorldNav from TeleType, you can
access the GPS settings menu by tapping on the
bottom right side of the GPS status screen. This
feature is not needed for WorldNav devices as
they are already set to the proper comm port and
baud rate).
