Frequently Asked Questions
12
© 2004 TeleType GPS
typical setup and connection procedures for your Bluetooth receiver (for help with connection, please
review the Connection section).
Finally, run the TeleType GPS software. Go to Tools > GPS Status > Status, select COM 8 as your
port, 4800bps, and tap Open Port. You should see symbols scrolling in the gray box below.
10
Care and Maintenance
Your TeleType Bluetooth GPS Receiver should be treated with care and properly maintained to ensure
the best performance. Keep in mind these helpful tips when using your receiver:
·
Keep this and all accessories out of small children's reach.
·
Keep your Bluetooth GPS receiver dry. Do not expose to rain, water, or high humidity environments.
Humidity, liquids, and precipitation contain minerals that will corrode its connectors, jacks, plugs, and
electronic circuit boards.
·
Use only the supplied and approved accessories. Unauthorized accessories, antenna, modifications
or attachments could damage the Bluetooth GPS receiver, and may violate regulations governing
radio devices.
·
Use a dry, clean soft cloth to clean the unit. Do not use harsh cleaning solvents, chemicals, or strong
detergents.
·
Do not drop, shake, or knock the Bluetooth GPS receiver. Rough handling can break the connector,
jack, and internal electronic circuit boards. This will cause non-recoverable damages to the product.
·
Do not store the Bluetooth GPS receiver in dusty, dirty areas. Its moving parts, like connector pins
and clips, can be damaged.
·
Do not store the Bluetooth GPS receiver in hot area. High temperatures can shorten the life of
electronic devices, and melt or drape certain plastics.
·
Do not expose your TeleType Bluetooth GPS Receiver to temperatures higher than 185°F (85°C).
Do not leave your Bluetooth GPS receiver in your car under direct sunlight while not in use.
·
Do not store the Bluetooth GPS receiver in cold temperatures. When the unit warms up to its
normal operational temperature, moisture can aggregate inside it, severely damaging the electronic
circuit boards inside.
·
Do not attempt to open the Bluetooth GPS receiver. Unauthorized handling may damage the unit,
and void your warranty.
·
Do not paint on the Bluetooth GPS receiver. Paint can clog the connector, jack, and prevent proper
normal operation of the unit.
