Teletronics International Inc.
CPE Complete User Manual
Page 21 of 27
6.1 Setting up the CPE as an AP with Teletronics 2Mbit Wireless NIC
•
The following explanation and screen shots will demonstrate how to set the CPE with
the Teletronics 2Mbit Wireless Network Card. If your wireless card is not
manufactured by Teletronics, please move to the appropriate section for your card.
Step 9.1:
You will see a screen like the one below. When setting up your CPE to act
as a CPE, the two areas of utmost importance are the
ESSID
and the
Wireless Mode
fields.
The
ESSID
field must reflect the
ESSID
of your CPE. If the ESSID fields
differ between your CPE and your AP, your network will not function. In
Diagram 3.0
, the
ESSID
of both the
CPE
and the
AP
is set to
TEST
.
The
Wireless Mode
field for an AP is always set to
Access Point
. The
only time that this option changes is when you want your AP to act as an
CPE.
Step 10:
Click on the Activate button at the top of the screen. This will save all of
your settings and activate any changes you have made to the default settings.
Clicking on Save and Reboot will have the same effect. You have
completed the setup of the CPE as an AP.
