Teletronics International Inc.
CPE Complete User Manual
Page 13 of 27
5.3 Setting up the CPE with RayLink 2Mbit Wireless NIC
•
The following explanation and screen shots will demonstrate how to set the CPE with
the RayLink 2Mbit Wireless Network Card. If your wireless card is not
manufactured by RayLink, please move to the appropriate section for your card.
Step 9:
You will see a screen like the one below. When setting up your CPE to act
as a CPE, the two areas of utmost importance are the
ESSID
and the
Wireless Mode
fields.
The
ESSID
field must reflect the
ESSID
of your Access Point. If the
ESSID fields differ between your CPE and your AP, your network will not
function. In
Diagram 3.0
, the
ESSID
of both the
CPE
and the
AP
is set
to
TEST
.
The
Wireless Mode
field for a CPE is always set to
Infrastructure
. The
only time that this option changes is when you want your CPE to act as an
AP.
Step 10:
Click on the Activate button at the top of the screen. This will save all of
your settings and activate any changes you have made to the default settings.
Clicking on Save and Reboot will have the same effect. You have
completed the setup of the CPE as a CPE.
