Teletronics International Inc.
CPE Complete User Manual
Page 15 of 27
Step 9.2:
(Optional) The PrismII Wireless Network Card has the ability to send and
receive encrypted transmissions. This function allows only CPEs and APs
with appropriate keys to communicate and disallows unauthorized use. The
following procedure will provide details on how to use this function. It is
important to note that both the AP and the CPE must support this function
and must be using identical keys. It is highly recommended that you make
sure your network is functioning before utilizing any WEP functions.
By default, WEP settings are disabled. You can activate WEP either by
using 64 or 128 bit encryption keys.
When 64 bit encryption is enabled, 4 keys are created, enabling the
switching of keys from time to time. When 128 bit encryption is enabled,
only 1 key is generated. In order to switch to a different key, a new
passphrase is required.
Steps in enabling WEP
i.
Choose which
level of encry
ption you would like using the drop
down WEP support option.
ii.
Choose how you would like to
enter your key
using the drop down
key entry option (manual or passphrase). Manual entry allows your
to manually enter your keys using hexadecimal values. Passphrase
creates hexadecimal values from the characters you enter into the
passphrase field. The maximum number of characters allowed in the
passphrase field is 35.
iii.
After you have either entered manual values, or have selected a
passphrase, click on the
Update Settings
button on the bottom of the
screen.
iv.
After you have updated the settings, the keys will be displayed, as
below. (The example on the following page uses 64 bit encryption
and a passphrase)
