User Guide -
EZMesh Full Duplex Mesh Network Access Point
Note:
Certain PCs or laptops may not reflect SSID changes instantly. If this occurs, disable
and re-enable the Wireless Network Connection in the Operation System, doing this will
ensure that all the updates are received.
Wireless Security
Disable Wireless Security (Default)
The default setting of the wireless security mode for the MeshAP unit is “Disable".
Configure WEP Wireless Security
To configure WEP data encryption, follow these steps:
Step 1.
Go to the Security section under Administration.
Step 2.
Use the drop down menu to select WEP Mode.
Step 3.
Select the Encryption Strength, and Select 64- or 128-bit encryption
TELETRONICS INTERNATIONAL, INC.
- 37 -
