User Guide -
EZMesh Full Duplex Mesh Network Access Point
Step 2.
Change PC IP address to
192.168.1.XXX
Subnet mask:
255.255.255.0
Step 3.
Access MeshAP via
WAN Ethernet Port
Make sure the Ethernet cable is properly connected to both MeshAP -
WAN
Ethernet Port
and PC -
Ethernet Port
. (Connect via
PoE Injector
)
Note:
Please review the Hardware installation Guide for more information.
Step 4.
Open a Web Browser and type
192.168.1.8
to access the MeshAP Access Point.
Step 5.
User Name:
admin
Password:
admin
Click "
OK
Wireless LAN Access
Step 1.
Make sure the MeshAP unit is
Powered On
and
Ready.
Once it is powered on, it
takes about 35 seconds for the MeshAP unit to completely get booted and be ready
for service and configuration.
Use wireless WLAN utility application on PC to scan for SSID:
mymesh
. Make
sure the SSID:
mymesh
unit has the correct Mac address.
TELETRONICS INTERNATIONAL, INC.
- 15 -
