Teletronics International Inc.
11M Wireless Pcmcia Card
Page 26 of 35
3. Loopback through Access Point (Infrastructure):
If you use the infrastructure wireless LAN configuration, you may select the Access Point loopback
test to verify the communication quality between your wireless station and Access Point. To run
the loopback test, select the
Loopback through the access point
item and click
Start
. Note
that it only works in the infrastructure mode.
Fig. Loopback through Access Point
¨
Packet Sent:
Total test packets sent.
¨
Packet Received:
Total responding packets received.
¨
Elapsed Time :
Total test time.
¨
Signal level:
The signal level when receiving last responding packet. The signal level is
calculated as the percentage of its signal level measurement relative to the full signal level.
