Teletronics International Inc.
11M Wireless Pcmcia Card
Page 25 of 35
2. Act as Slave test station (Ad-Hoc):
You can press the
Start
button to start the slave test station. The “Slave Test Station” window
will be displayed after pressing
Start
.
The “Slave Test Station” window contains following status/statistical information during the Link
Quality Test session:
Fig. Act as Slave test station
¨
My Address:
The slave test station’s physical address.
¨
Packet Received:
Total test packets that have received.
¨
Elapsed Time :
Total test time.
¨
Signal Level:
The signal level when receiving last test packet. The signal level is calculated as
the percentage of its signal level measurement relative to the full signal level.
