Teletronics International Inc.
11M Wireless Pcmcia Card
Page 24 of 35
1. Act as Master test statio n (Ad-Hoc):
Input the MAC address of the destination slave test station before pressing the
Start
button. The
slave MAC address can be found from the slave test station’s screen. The “Master Test Station”
window will be displayed after pressing
Start
.
Fig. Act as Master test station
The “Master Test Station” window contains the following status/ statistical information during the
Link Quality Test session:
¨
Slave / Test Address:
The physical address of the destination slave test station. (The physical
address of your own wireless station will be displayed while performing Access Point loopback
test.)
¨
Packet Sent:
Total test packets that have been sent.
¨
Packet Received:
Total responding packets that have been received.
¨
Elapsed Time :
Total test time.
¨
Signa l level:
The signal level when receiving last responding packet. The signal level is
calculated as the percentage of its signal level measurement relative to the full signal level.
