Differences between Modem Ports
The default factory config between the two modem ports are that the Modem
2 port is optimized for 2400 baud devices, such as Power Meters. Port 1 is set
for up to 33.6 kbps operation.
Both ports can be programmed to be optimized for 2400 baud, or full data
speed. Contact Teletics support for more information.
Call Progress Tones
The MoNet “off hook” tone is slightly higher pitch than a typical phone line.
When a call is progressing, you will hear “escalator tones”, in 4 levels.
Busy signals are identical to regular POTS phone lines.
LED Status Indications
The LEDs labeled Modem1 and Modem 2 on the MoNet will emit 4 flashes
when they are connected or connecting to another MoNet. When the Modem
port is idle, they will not be lit.
Hidden Reset Button
The Reset button on the MoNet is accessed through the front panel, by
pushing a non-conductive pointed object through a very small hole. The hole is
located between the two right front panel screws, and left of the Teletics logo.
Please do not press this reset button without first contacting Teletics technical
support.
www.teletics.com
!
9
