Basic Troubleshooting
Check to see if you can “ping” the MoNet. Type “ping” and the IP address
shown by Beaconsearch and hit enter. You should see replies, like below:
If you cannot ping the MoNet, you should check if your network adapter in
your Computer is correctly set up. Type ipconfig and compare your output to
the one below. Generally, the first 9 digits of the IPv4 address needs to be the
same as the IP address shown by Beaconsearch:
If the first 9
digits are
different than those shown in Beaconsearch, then you need to set the network
on the computer to obtain the correct IP address automatically.
www.teletics.com
!
10
